Perovskite solar cells are thin-film devices that convert light into electricity using special semiconductor materials called perovskites. Their key difference from conventional solar cells lies in their thickness and manufacturing method: a perovskite cell is extremely thin, its active layer ranging from several to 300-700 nanometers. For comparison, a human hair is 50-100 micrometers thick. Importantly, perovskite cells are produced with relatively inexpensive materials; so, in the future, their production may be cheaper and simpler than that of conventional silicon panels.

Perovskite cells are a kind of “nanosandwich”: they consist of several very thin layers. A transparent electrode allows light to pass into the system and conducts electricity, while a perovskite layer transforms solar energy into positive and negative charges; the transport layers then guide these charged particles to electrodes, producing an electric current.

However, a part of the charge can be lost at the border between layers, causing the device to produce less energy. One of the key scientific challenges here is to reduce the losses and ensure an effective transfer of charge between materials. A team of experts from ITMO’s Laboratory of Hybrid Nanophotonics and Optoelectronics and Infochemistry Scientific Center was able to solve this problem.

The researchers placed a 4-nanometer-thick layer of a polyelectrolyte – protonated polyethyleneimine (PEI) – between the transparent electrode and the transport layer. At the boundary between the two materials, positive charges must overcome an energy “barrier”: if it is too high, some charges become trapped or are lost. The thin PEI layer altered the electrode’s surface properties and improved charge collection. It smoothed the energy “step” at the interface between the two materials. As a result, positive charges can more easily leave the transport layer, and losses at the layer boundary have decreased.

Polyelectrolyte solutions used to make thin layers. Credit: Dmitry Grigoryev / ITMO NEWS

Polyelectrolyte solutions used to make thin layers. Credit: Dmitry Grigoryev / ITMO NEWS

“Such polyelectrolytes have already been used in organic solar cells. However, we haven’t found this approach to be widely used for perovskite devices, where charges behave differently. That’s why our task was to adapt it to a new class of solar cells,” shares Alexandra Furasova, a member of the team and a senior researcher at ITMO’s Faculty of Physics.

Alexandra Furasova. Credit: Dmitry Grigoryev / ITMO NEWS

Alexandra Furasova. Credit: Dmitry Grigoryev / ITMO NEWS

As a result, all key performance metrics improved. Most notably, the open-circuit voltage – the maximum voltage a device produces when no load is connected – increased from 1.097 V to 1.143 V. The fill factor, which indicates how efficiently a cell converts the energy available to it, rose from 69% to 77.5%. Consequently, the efficiency of the best sample reached 23.45% under standard testing conditions, which simulate sunlight. The cell without the polymer interlayer had an efficiency of only 18%. According to the authors, that’s the best result among perovskite solar cells produced in Russia, and quite a high result among the cells produced globally.

The researchers tested the design not only under bright light but also under conditions closer to real life. At 50% of standard solar illumination, the modified cell achieved an efficiency of 21.67%, compared with 18.90% for the conventional one; at 30% illumination, it reached 19.52%, compared with 18.71%. The cells were also tested under an LED lamp with a color temperature of 4,000 K: at an illumination level of 1,000 lux, the efficiency reached 25.5-25.8%. This means that the cell converts energy efficiently not only from sunlight but also from artificial lamp light.

“Such perovskite elements can find their applications in much more than regular solar panels. They can function in indoor lighting, which means that in the future they will be able to charge low-power wireless sensors, including temperature and humidity ones, as well as Internet of Things devices. It’s not always convenient to change batteries for such devices, so having an energy source directly inside the room can be especially practical. These days, researchers all over the world are working with lab samples. However, the method looks promising for production: the polymer is applied as a thin liquid layer, while the production itself doesn’t require high-temperature annealing. In the future, such polymer layers can become a part of the technology of industrial perovskite solar cell manufacturing,” adds Alexandra Furasova.

This study is supported by the Russian Science Foundation (project No. 24-79-10131) and involves collaboration with the Institute of Automation and Control Processes of the Far-Eastern Branch of the Russian Academy of Sciences.